Report item
Item specifics
  • Power: 2.4
  • Item Height: 1
  • Voltage: 12
  • Model Name: 7 Pin Trailer
  • Item Width: 4
  • Car Maker: Audi
  • Hardware Version: newest
  • Software Version: 7 Pin Trailer
  • Electronic: No
  • External Testing Certification: CE
  • Item Length: 5
  • Item Type: Car Diagnostic Cables and Connectors
  • Material Type: plastic
  • Item Weight: 0.3
  • Special Features: use for Vehicle Car Diagnostic Tools
  • name: 7 Pin Trailer
  • Features: Vehicle Car Diagnostic Tools
  • 7PIN: Trailer Towing Light Cable
  • Material: Plastic
  • Application: Car Diagnostic Tools
  • Function: test the trailer power supply wiring whether normal or not.
  • Condition: 100% Brand New
  • Vehicle Car Diagnostic Tools : 7 Pin Trailer Towing
  • car Plug Socket tester: use for vehicle diagostic tools
Product Description
New Vehicle Car Diagnostic Tools 7 Pin Trailer Towing Light Cable Circuit Plug Socket Tester Plug Socket tester

 

Description:

Trailer tester for 7 pins plug and socket connection.
Used to test the trailer power supply wiring whether normal or not.
With 7 LED indicators.
Indicates any failure for your wiring on the car or on the trailer.
Portable and lightweight.

 

Specifications:
Item name: Trailer tester

Power supply: 9V battery (not included)
Item size: 17.5 x 5.3 x 4.2cm / 6.9 x 2.1 x 1.7in
Item weight: Approx. 152g/ 5.4oz

 

How to test the connection of a Trailer (can also be a caravan or bicycle carrier)

1. Put the plug in the connection of the tester.
2. Press the yellow button on the side of the tester.
3. If the wiring is good, all the LEDs light up. the function of each LED is (acc iso 1724):
a. left hand indicator (yellow);
b. fog light or 12V (blue);
c. mass (white);
d. right hand indicator (for green);
e. right rear light (brown);
f. left brake light (red);
 left rear light (black).

 

Attention:  The pin no 2 can be used either for a warning fog lamp or a permanent 12V connection.
If a LED doesn\'t light up, it is because the corresponding wire is defective. If all the LEDs don\'t light up.
1. Put the tester in the socket of the car.
2. Press the yellow button on the side of the tester.
3. If the wiring is good, all the LEDs light up. Do again steps 4 as previous.
You can also test the functions of each pin of the socket.
1. Switch on the left hand indicator (after switching on the ignition key).
2. The corresponding LED must flash with the same frequency. If not, left hand indicator wiring is defective/broken.
3. Repeat steps 1 and 2 for the right hand indicator, rear light, fog light and stoplights.
With a +/- 4 m extension cable, you can test the functions form the driver\'s seat more easily.

 

Package list:

1 x Trailer Socket Tester
1 x User Manual

 

 

 

 

 

 

 

 

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.15kg (0.33lb.)
  • Package Size: 10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.15kg (0.33lb.)
  • Package Size: 10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.